They may gain the assistance of additional party members, and they eventually acquire a keep that can be used as a base of operations. Neverwinter Nights 2 is set in the Forgotten Realms campaign setting—in and around the city of Neverwinter. Neverwinter nights download abandonware manual.

Microsoft sql 2008. PRTG Manual: WMI Microsoft SQL Server 2008 Sensor. The WMI Microsoft SQL Server 2008 sensor monitors the performance of a Microsoft SQL Server via Windows Management Instrumentation (WMI). After the SQL Server user activity is stable, this value reaches a steady state. SQL Re-Compilations. Number of SQL recompiles per second. May 14, 2010 Users who have SQL Server 2008 installed with shared components, including SQL Server Books Online, and who upgrade to and subsequently uninstall SQL Server 2008 R2 Books Online and reinstall SQL Server 2008 Books Online may experience minor issues, such as a default starting topic with a SQL Server 2008 R2 heading. Microsoft Windows Server 2008 R1802926, Sql Server 2008 R2 22809175, Sql Server 2008 R.2 Small Business Edition C9C00500, Windows Server 2008 R1802907, Windows Server 2008 R.2 P7305128, Sql Server 2008 R2 22809176, Windows Server 2008 R.2 Enterprise P7204473 User Manual. Size: 755.53 Kb. Ask the question you have about the Microsoft SQL Server 2008 R2 here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Microsoft SQL Server 2008 R2 owners to provide you with a good answer.

Apr 19, 2014 Review and overview of the HooToo WiFi repeater. Wifi repeaters are available on Amazon UK: and Amazon.com:. Linksys AC1200 Max Wi-Fi Range Extender Introduction This User Guide can help you connect the extender to your network and solve. How to install the range extender Before setup, unplug or disconnect any range extenders on the network. Linksys AC1200 Max Wi-Fi Range Extender Connect.

Wifi Repeater Manual Pdf

Wireless-N Wi-Fi Repeater/ Extender Quick Installation Guide Introduction The Wireless-N Wi-Fi Repeater/Extender can extend and increase signal strength for 802.11n/g/b wireless networks.
Features and Benefits • • • • •
Compact and portable for business travelers Supports 2.4GHz WLAN networks and complies with IEEE 802.11n/g/b Switchable wireless operation modes: Repeater or Access Point (AP) Supports WLAN security with WPA, WPA2, WEP (128/64) and WPS Data transmission rate up to 300Mbps
System Requirements • • 04-0867A
802.11n/g/b Wireless LAN network 110-230V AC electrical outlet 1
Package Contents • • • •
Wireless-N Wi-Fi Repeater/Extender RJ-45 Ethernet cable 3 Interchangeable wall plugs Quick Installation Guide
Layout
Power LED
Wireless indicator LED Ethernet indicator LED
RJ-45 Port
Reset button
Figure 1: Layout
• • • • 2
Power LED: Steady red light when power adapter is connected Wireless indicator LED: Green light when wireless activity is detected LAN indicator LED: Green light when Ethernet cable is connected Reset button: Press and hold for 10 seconds to go back to default settings
Start Using the Wireless-N Wi-Fi Repeater/Extender 1. 2. 3.
Plug the Repeater/Extender to a reliable AC power outlet. Connect your Repeater/Extender to your computer using an RJ-45 Ethernet cable. Configure your system's IP address to be in the same network domain with the Repeater/ Extender. • IP address: 192.168.10.x (x = any number from 2-254) • Subnet mask: 255.255.255.0 • Default gateway: 192.168.10.1 • DNS server addresses: Leave blank
Figure 2
4.
Open a browser and enter 192.168.10.1 into the address bar and hit Enter. 3
Type admin for both User Name and Password, then click OK.
192.168.10.1 admin OK
Figure 3
5.
Follow the instructions below to set up Repeater or AP mode.
Repeater Mode Configuration This mode extends and boosts existing wireless signals in hard to reach places. 1. Click Setup Wizard on the left side bar, select Wireless Repeater Mode, click Next. Setup Wizard
Wireless Repeater Mode
Next
Figure 4 4
2. 3.
Click Repeater - OneKey Setting. Select the desired wireless network, then click Next.
Click radio button to select
Figure 5
4.
If the selected wireless network has a password, enter it into the Pre-Shared Key field, click Apply and Reboot, then OK.
Pre-shared key
Apply and Reboot
Figure 6
5.
If successfully configured, the configuration settings/status will show Repeater and the State is Connected. See Figure 7. Note: If the configuration fails, repeat steps 1-4, click Reboot at the left side bar to reboot the Repeater/Extender. 5
Repeater
Connected
Figure 7
6.
Wireless AP Wi-Fi Repeater-1 is ready for connection now. NOTE: The AP name can be changed through Basic Settings. See page 8.
AP Mode Configuration This mode gives a non-wireless connection wireless-N capabilities. 1. In the main menu, click Setup Wizard on the left side bar, select Standard Wireless AP Mode, click Next. 2. Click AP - OneKey Setting. 3. The Repeater/Extender will be configured automatically to the AP mode. see Figure 8. 6
AP
4.
Figure 8
In the main menu, click Security (under Wireless) on the left side bar, type in your password in the Pre-Shared Key field and click Apply Changes. Note that WPA2 is default encryption method and is recommended.
WPA2 Apply Changes
Figure 9
NOTE: Security code is recommended. Skip this step if it is not needed. 7
5.
Connect the Repeater/Extender to your router with an RJ-45 cable. Wireless AP WiFi Repeater is ready for connection now. NOTE: The AP name can be changed through Basic Settings. See Basic Settings in the next section.
Wireless - Basic Settings 1. 2.
In the main menu, click Basic Settings (under Wireless) on the left side bar. Change the basic settings, then click Apply Changes.
Apply Changes
Figure 10 8
Wireless - WPS 1. 2.
In the main menu, click WPS (under Wireless) on the left side bar. Click Start PBC to enable the WPS function.
Start PBC
Figure 11
Application PC
PC
Internet
Router
Figure 12 Repeater Mode 9
PC
PC
Ethernet cable
Internet
PC
Router
Figure 13 AP Mode
10
Technical Support and Warranty QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for two (2) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details. If you encounter any problems with this product, please follow the procedures below. A) If it is within the store's return policy period, please return the product to the store where you purchased from. B) If your purchase has passed the store's return policy period, please follow the steps below to have the product repaired or replaced. Step 1: Submit your RMA request. Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product. • Properly pack the product for shipping. All accessories that came with the original package must be included. • Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton. • You are responsible for the cost of shipping to SIIG. Ship the product to the following address: SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #: •
SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer.
11
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, Fire

Wifi Repeater User Manual Quick Installation Guide